The brief analysis of the printer will board type and reason of crushing

Cardboard crushing have all been crushed, strip flattening and the difference of local flattening, how to distinguish the different types?Where did these case appeared to be the problem?

A, all get squashed

If found the cardboard comprehensively by crushing, please confirm whether the printing surface is full version, if not full printing, it must be the paper feeding wheel will board of crushing.If it is full of printing, the printing pressure first let go, to feed, if the board is not crushing, it is the print pressure caused by cardboard was crushing.

Second, the strip flattening

When a local flattening, usually with paper roller pressure is too large, lead to the cardboard squashed.Cardboard squished show whole state at this moment, and take paper round as wide width.This is obvious that easy to distinguish.

Third, local crushing

Cardboard surface in the printing design crushing area, which means the printing pressure caused by local area cardboard flattening, then squashed shape and printing design is the same.

Die cutting pressure, of course, also can produce all the phenomenon of squashed, and cardboard to be crushing of the printing press was probably caused by a printing press pressure is too large, for this type of problems should be analyzed according to the practical situation.

Thai printing industry in 2014 are greatly influenced by economy, growth is slowing

http://www.lprinting.net/content/?663.html

Thai industrial institute, vice chairman and President said printing and packaging industry, affected by the global and domestic economic slowdown, the printing industry in Thailand this year's dismal performance.Past the end of often the order peak yet again, both commercial bank and state-owned enterprises have reduced the calendar, greeting card printing aspects such as cost.

He said state-owned enterprises, Banks, listed companies and other large companies to reduce the expenditure of the 2014 printing products, damping is as high as 20%.The SME business drop was as high as 60%.

He said, according to the current situation, in 2014 the national printing industry is not negative, it is already the best transcript.Although the print industry still has the market capitalisation of nearly 300 billion baht, but this year's growth prospects are worrying, do not rule out negative growth.

Traditional print industry in basic consistent with the growth rate of GDP growth rate.However, still believe in printing industry in 2015 will be able to obtain and consistent economic growth performance.

At the same time, he also revealed that plastic printing is ready to develop new products to meet the AEC upon opening, to the neighboring countries and market development opportunities.Thailand print no matter in technology or equipment technology, is in the world leading level.

There are companies began to peripheral market penetration, such as Vietnam, myanmar, and already prepared to Cambodia and Indonesia, the Philippines and print market penetration.

Long printing group global flexible packaging market is expected to 4.4% compound annual growth rate to rise

We have learned, to 2019, the global demand for flexible packaging market value will amount to $99.1 billion.During 2013-2019, to 4.4% compound annual growth rate to rise.In terms of market value, flexible packaging global demand fell to $73.56 billion in 2012.

Plastic for packaging offer convenience, make its become dominant material in the packaging market (70% market share in 2012).Over the next five years, however, because of the improvement of environmental awareness, the market will turn to support flexible packaging based on cellulose.In the field of research and development is increasingly advancing, nanotechnology is likely to bring global flexible packaging market breakthrough development.

Plastic flexible packaging pharmaceutical market flexible packaging will be need to pay close attention to, because the new opened packaging requirements brought new opportunities.To 2020, the asia-pacific region is the fastest-growing region.

The essence of packaging is to protect the quality of the products, but also can prevent chemistry endanger the health of consumers.Consumption increase on the use of packaging products for the global flexible packaging market provides a strong customer base.Therefore, an effective and appropriate packaging is necessary for each product.

Important materials used in the flexible packaging market, PE, PP, BOPET, EVOH, PA, paper, aluminum, cellulose and PVC, the raw materials are processed into film, then further processed into bags, small bags and handbags, used for packaging products.

The food industry is one of the leading industry, flexible packaging market drugs industry also for the healthy and rapid development of the market.The asia-pacific region with the highest market share, is expected to 2019 will be 7.1% compound annual growth rate to rise.

Europe compound annual growth rate will reach 3.9%, with a major push by the eastern European market.Flexible packaging market to develop the most promising of the four countries are India, China, Russia and Brazil.0

Long printing group to teach you how to choose the art of paper printing and ink

Due to the art of paper on the raw material and papermaking technology has certain particularity, so art paper with ordinary paper on paper structure and performance have bigger difference, the selection of printing ink and printing process has different requirements.On the choice of printing ink and should pay attention to the following three points.

One, pay attention to the art of paper absorbency

Different art paper on ink absorption of the sex difference is very big, such as the cup mat board easily absorb ink, leni riefenstahl paper ink absorption, more easily and is hard to suck the ink such as vegetable parchment.In printing ink absorbency is directly related to the quality of the printing quality and the drying time, absorbency of different art paper to printing by adjusting the pressure and usually add ink additives to control, such as poor for the absorbency of paper, can properly add drier or used in printing ink uv curing, lest caused by ink drying too slowly on the back of the phenomenon such as sticky dirty, imprinting pulverization.Of course, the structure of the paper have a lot of influence on absorbency.Some paper texture is relatively thick, ink can easily penetrate into and dry;While some quality of a material is very close, ink on paper surface, such both neither are easier to penetrate into the paper, are less prone to dryness.

Second, focus on art paper smoothness

Because of the differences in the papermaking process is different on paper, art paper, such as some paper relatively thick, smooth degree is low, some relatively close, smoothness is higher.Such as printing more thick art paper, printing pressure shoulds not be too large, otherwise it will damage the class art paper background apparent characteristics, and result in deformation of the paper.On the other hand, if is relatively close art paper, printing material should be appropriately increased printing pressure.In addition, some art paper with embossed effect (such as the embossed paper) and strip texture effects, such as bamboo paper), for this type of art paper, try not to use (or less) printing ink, as long as the use of natural float lines, the paper carry on some simple local processing, such as pressure bump, UV glazing, hot stamping, etc., to retain and use of the nature of the base paper, can achieve the ideal decorative effect.If to ink printing, pay special attention to control printing pressure.

Third, pay attention to some other characteristics of art paper

Art paper and plain paper does not have characteristics, such as texture.We know, paper is flat material, can through the graphics of visual sense, let a person feel material such as stripes, background of design and color is designed using the people visual sense.In packaging and printing, more attention paid to the texture, such as to make people perceive touch of fun on the surface of the packaging materials, make a wide range of textures of different art paper (such as embossing paper, paper brail) has been widely used.In the design of printing, using rough and texture and shining paper is a kind of very important texture design.On the rough texture of the art of paper printing can further strengthen the simple sense, even if in the silk has a subtle effect of concave and convex at the small print on the paper pattern, also has the very good visual texture effects.In addition, different materials have different texture texture (texture).Skin texture has a natural texture and texture, variety of art used in the printing paper is through the manufacturing process for processing and texture.Texture visual texture and tactile texture.The texture visual texture is a two-dimensional plane.Tactile texture usually by consolidation pressure, die cutting, carving processing way and get, is a three-dimensional texture, with the hand can touch feeling.Art paper is better than plain paper texture and texture, no matter from macroscopic or microcosmic world provide plenty of material for packaging design, etc.For these art paper, should try to use the essence of the paper, use less ink printing (especially large area printing), and pay attention to control the printing in the printing pressure.

China traditional printing industry development condition analysis

Traditional printing is from sorrow to the end of the beginning of this year, after all?Relevant services may bring traditional printing different train of thought.

The upcoming 2015, printing industry still present anxious situation, some traditional strength, wide business printing enterprise began to enter the digital printing, about 70% of the digital printing technology is applied to the business fast printing, mainly building graphic;Still didn't get to the core of the product and business model.Then, in the digital printing industry development trend in 2015 do what?

Amalgamation of the traditional printing and digital printing, with each big media and industry "bosses" predictions.Some traditional printing enterprise, see the digital printing on the convenience and value-added of the digital printing machine, but the current application is limited to proofing.So, the traditional printing enterprise should be how to use digital printing equipment?When ordinary printing machine first, and take advantage of capital advantage, business directly with the equipment to discuss new cooperation pattern, do not collect fees by zhang, also won't feel the cost is high, but also greatly expand the scope of business to undertake, the customer experience.

Quick printing shop will meet many of the traditional printing list for printing, but is the printing plant as a factory.Because of multiple reasons, printing and transferring them to the suburbs, if stores take advantage of orders, set up their own printing center, is also a development path.

Printing is the essence of the spread of information, but in the past for a long time, the printing industry is defined as the processing and manufacturing, printing industry to service transformation is one of the trend of printing, this shows that the printing services is not now, not to mention the information industry, IT industry, high-tech industry.

Not only is need digital printing, but management, technology, process and standards.Digital printing enterprise cannot do only processors, and information processors to do.

Due to the limitation of cost, again by price competition has been impossible, printing companies only through to provide more value-added services to win customers.Stand in the position to help clients understand the market.Through powerful prepress technology strength, help customers to select the most optimal product design scheme, help customers improve product quality, save cost, and realize benefit maximization.In the long run, it will naturally become your regular clients.Traditional printing enterprise is a production, design, or no to meet the requirements of customers and the existence of prepress design department.Now, the request has been on the front of all the printing factory, customers need to printing enterprise to help them complete planning, and a number of alternative.

Printing enterprise can further extending the industrial chain, and post-press processing enterprises established stable cooperative relationship, customers don't need to print the subsequent processing.Printing companies can through their own industry resources, from the pre-press design of the product to the formation of the final product to provide "one-stop" work style service and the whole process solutions.Printing enterprise is not only to new period dutifully completed product processing, but also as a service industry, let the customer feel the biggest convenience.Such as increasing product protection, storage, transportation, customer property management, etc.In the short term, these may increase the enterprise's product, but in the long run, if this kind of advanced concepts into enterprise culture, so it formed by the brand value is immeasurable.

Shenzhen printing industry development is good

Shenzhen printing to become China's largest printing and packaging city, and an important print export base in China.A large number of overseas medical, food, packaging printing, as well as books and children's books, are printed printing enterprise in shenzhen, shenzhen in the process of China's printing industry walk out, has been a step ahead.

Publishing, shenzhen a total of 2013 public offering of 14 newspaper, journal 37, 2 books publishing house, audio and video publishing house four, electronic publishing company 1, 14 Internet publishing units.Books published in book publishing house in the city of 689 species (including new books 371), total about 10.72 million copies, ministrial 175 million always made goods.In 2013 the city newspaper publishing run -- 727.07 million copies.Internet publishing output value of nearly 35 billion yuan.The city of 26.19 million copies, total about $207 million.Printing industry, in 2013, shenzhen printing enterprises 2430, gross industrial output value of 32 billion yuan, the staff 180000 people.More than 400 printing enterprises undertake the printing more than 50 countries and regions, processing and output value of more than 104 one hundred million yuan.More than 10 enterprises included in the "national top printing enterprise".

Distribution sector, shenzhen a total of 2013 publications wholesale units 86, issuance of 740.487 million yuan;Retail units, 1053, total output value 3.4165 billion yuan.

Downturn in a decade, see the paper industry development situation

There is no doubt that the paper industry has experienced great impact in the past 10 years, can no longer be a repeat of the 2000.According to the American association of forestry and paper industry, in 2000 the national paper and paper products output reached 94 million tons.While last year than this amount decreased by 14.5%.

The shrinking about 85% comes from newspaper, printing products and the demand of the writing paper.Brookings institution erin card mark (Elaine Kamarck), said the U.S. government to take a series of paperless measures had a major impact.

The project by former us vice-president al, (AlGore) is put forward, and from 1993 to 1997 by the mark is directly responsible for, the purpose is to improve the efficiency of the federal government.One by one, surfaced, the new government websites taxpayers can also directly through the online file tax returns and get feedback.

When the public opinion is the focus of the debate is: the government to use public resources to service the upper middle class.Carmack said: "there are a lot of people at that time was to explore the gap between rich and poor in Internet penetration, think that the Internet is only for the rich. It was in the 1990 s, nobody expected home computer will spread so quickly."

The Internet age paper wall to survive

The rise of the Internet, however, pulp and paper industry was caught off guard, but due to the relevant enterprises to seize the cultural trend quickly, so be reborn.Mohawk would make full use of the rise of the paper-based souvenirs for market supply profit margins as much as 40% of high-end products.

Transformation of industry leading products

Large leading papermaking enterprises also made from the development of digital industry profits, industry leading International Paper is one of the representative.Bought several carton manufacturers, the company in the industry occupies 35% market share, and with the rise of Internet shopping, carton has become the main commodity shipping container.

But there are still a lot of people to the revival of the paper products industry.The natural resources defense council, a senior scientist Alan He Xikao weitz (Allen Hersh has written kowitz), said the paper industry is a large energy consumption, will not only consume large amounts of water, greenhouse gas emissions is also taking the lead in various industries."From the ecological perspective, the paper is one of the most destructive industries."He said.

In 2014 China's printing industry year-end comprehensive large inventory

The weather turns cold, also near to finishing a year.For printing and packaging industry, this year was not calm.Shrinkage and consolidation, appear alternately opportunity and hope.   

Although I don't know what happened in the last two months there will be, but here long printing group can give you do a year-end inventory in advance of industry.  

A, more and more newspapers YinChang began to work honestly

Now run -- in 2014, newspaper printing, layout continues to decline.The equipment to use single function, a lot of newspaper printing plant has losses to the point of unsustainable. 

For out of the woods, a group of newspaper YinChang has been trying to run other business to sustain.Xinhua printing company, for example, chose the consumable logistics operation and the transformation of the way., of course, that doesn't include the most simple and crude of the startup, like lianyungang daily newspaper printing company management of auto 4 s shops, yangzhou daily newspaper printing company in the process of start driving, etc.  

In addition, many YinChang business gathered in a YinChang, solve various YinChang serious overcapacity situation.The allocation of resources can also make some newspapers get rid of the printing is not the state of the economy.   

Second, the big enterprise, big group to become the main digital printing

10 years ago, the introduction of digital printing equipment, in addition to the graphic quick printing shop, a large number of printing companies rarely.But now as a result of rapid ascension of commercial real estate rental, artificial cost is high, in 2013, a large number of digital quick printing shop all suffered operating difficulties.   

At the same time, the digital printing equipment to high resistance force, high capacity, high image quality, high automation, large, such as direction, more and more is also high cost performance.  

So, there are many big 2014 printing enterprises are getting into the digital printing field, some hope through digital printing to solve the problem of enterprise development, there are also some hope that through the digital printing to create the Internet platform to promote national development.And some special printing enterprises, such as clothing tags, CARDS, business CARDS, packaging, anti-counterfeiting, security printing, direct mail bill such as the special application of small and medium-sized enterprises, regardless of size, are generally combined with digital printing and traditional printing production.    

Once compared the digital printing and traditional printing, most companies are now see, tube he cat, satisfy customer needs is the "good cat".

Three, look very beautiful cloud printing, has TuHao throw money

If 2014 hot events, cloud must calculate on printing.In India after the market leading position and Taiwan jian hao mature business model and system software, they make enough cloud printing business starting media and industry in the people's attention.In tianjin factory covers an area of 800 acres, the total investment of about 2 billion yuan also let everybody feel the "TuHao" determination and strength. 

No matter cloud printing controversy has how old, after all, in the Internet age, the printing enterprise for the future of the Internet under the forms of industrial preparation is relatively lagging, it is potential.More and more printing enterprises have to provide Internet application solutions as the development direction.  

Four, creative service to support business to make money, and can fight alone for gold

Due to the printing industry downturn, many printing enterprise still at a low price as a means of competition.This is not only at home, in Europe, Japan, etc., printed matter is more and more low, price competition is the same.  

So, some more service consciousness and the ability to design printing enterprises to adopt differentiation competitive strategy, outstanding creative advantage, in addition to the simplest collect rent, by receiving digital printing orders, also provide testing platform services such as money, and frequent group printing industry summit, packaging design competition, etc, also play a snowball effect. 

Though, printing and packaging industry gradually from enterprise bankruptcy this year, the market downturn, such as news, but any one industry, when the pessimistic mood began to diffuse, hope and opportunity will appear in casual in, see you how to do the rest.

How long printing group to share three steps of sorting out the saddle stitching wire from

Equipment operating saddle stitching, adjustable wire normally takes longer.In lung print job, summarizes a practical experience of the group, the only three steps can quickly, accurately adjusted the silk, the steps are as follows.

The first step, the collection of books chain plate to throw the right position.

The second step, some equipment to the position of staplers after foot after silk.

The third step, locate order first.

Stapler on the scale, so as long as with straightedge measuring the end of the first order, other order head position can be calculated to determine.Horn book chain as a benchmark to set, the first order head and the distance of the horn is (book long x 1/4 + 3) mm;The second order head and head of the first order from a (book long x 1/2-26) mm;The third order first and the second head distance for (book long x 1/2 + 6) mm;The fourth order head and head of the third order from a book long x 1/2-26 mm.Among them, the book long distance a quarter for silk, 3 mm is for barns reserved cutting quantity, 26 mm for two wire length, 6 mm is double the reserved quantity of cutting in the middle.

Calculate a numerical, driving the same size of the book, after can scale on the stapler determines the location of the three order behind head, as a result, 2 minutes to set of double wire spacing, greatly improving the work efficiency.

The magazine printing process need to pay attention to three things

In addition to business magazine, a lot of enterprises, the company also requires its own propaganda magazine, use fine magazine spread their services.If a enterprise want to print your magazine, need to pay attention to what issues?

Business magazine printing three considerations:

First, as far as possible to achieve enterprise information detail is perfect

Many readers see enterprise comprehensive information, will have a curious mind to understand, understanding to enterprise, such enterprise knowledge to the outside world to a broadcast.Enterprise content is more detailed, information transmission speed is faster, network will also increase gradually.So it was important to foreign enterprise information dissemination.

Second, the perfection of the design

General magazine sales more or less is mainly determined by the designer, design the picture more attract consumer attention, so they buy at the stronger;Sometimes the design is more important than the content.Many consumers believe that no matter how bad enterprise content, but as long as the good design and art, also can get recognition and support of consumers.

Magazine cover design of the four skills

1, cover design, clear positioning

2, cover design unique aesthetic value

3, cover design embodies characteristics of advanced culture

4, in line with the audience aesthetic psychology

Third, choose the good printing

If you choose to many small printing equipment and processes do not have large printing plant, combined with printing technology and process, and many other steps, small presses hard to perfection;And small printing cost will be higher, the printing quality is low, so choose the printing is also very important.Longyin printing group, is a has more than 10 years experience in printing presses, has its own unique advantage in magazines printing, whether in design, or in print, quality assurance, can have necessary magazine printing customers can contact us to negotiate advisory!

Children Album Printing, Children's Book Printing,Printing in China

http://www.lprinting.net/content/?645.html
We provide Children Album Printing, Children's Book Printing,Printing in China and all kinds of paper printing service.
100% OEM Factory
Our factory is located in Longhua, Shenzhen, with more than 300 employees, which make our price more competitive in  with guaranteed quality and best service.
Guaranteed Quality
We have over 50 technical staffs and 30 QC staffs. Our knowledgeable team has years of experience in print design in a wide variety of genres,Our designers will create a custom book cover that you can be proud of.
Advanced Equipment
Oour equipments are all from famous printing-machine factory in the world, Heidelberg four-color machine,komori monochrome machine, which can make sure high printing quality
Free Samples
Free preprint digital proof and advanced samples can be provided if order placed

UK per capita books printed for the most of the world

http://www.lprinting.net/content/?639.html

It is reported that British and print-on-demand publisher in 2013, the new book a total of 184000 copies (60000 copies for e-books), equivalent to book 2875 copies per million residents, the per capita books printed above the rest of the world, to become the world's first.

The data from the international publishing association (IPA) in a report.International publishing association, according to statistics from different countries publishing association, the national library, the national standard book number management departments, but does not include the books published by the authors themselves.A total of 40 countries included in the report, these countries can provide reliable whole books market value or publisher's net income.British of statistical results from the famous book information, Nielsen book service company.

Statistical results adumbrative culture vitality or can bring devastating blow to the publishing industry.Excessive published may lower the quality of the publication of the books.A book is easy, but a good book is much more difficult, the quality is far more important than quantity.

But there are also optimistic voice on statistical results, think books can greatly the revitalization of culture.Although not all the books can make readers feel shocked, but if publishers want people to hear the author, will be more widely accepted.

In 2014 China printing BBS and the imminent opening of the 14th Asia Pacific printing BBS

In 2014 China printing BBS and the 14th Asia Pacific printing BBS on November 13, 2014 at 9 am in the Shanghai world headquarters of dragon garden began.With "innovation, opportunities, and the future" as the theme, from the United States, the European Union and the asia-pacific and other countries and regions in the printing industry, printing industry in China and the government competent leadership will give a speech on current status of the printing industry.At the same time, the organizers also invited to the business, the dragon group share enterprise development experience, to show good printing enterprises in China.

State general administration of press and publication, radio and television, director-general of the department of printing issue  wang attended ms will be issued at the meeting entitled "fusion mutual benefit the sustainable development of China's printing industry" keynote speech.2014 China printing industry development how?In the pursuit of the road of sustainable development, the government will guide farmers to printing industry?Wang Sichang speech, will solve your doubts in my heart.

From the European Union, the United States, Japan, South Korea, Malaysia, Australia, India, the Philippines and other countries and regions around eight printing industry experts to further elaborate the present situation and problems of printing industry.

C&c joint printing co., LTD., in the publishing world renowned Chinese and foreign, has more than one hundred years of history, is a large international reputation for printing group.C&c joint printing co., LTD. CEO Mr Liang Zhaoxian will share digital wave in BBS, the innovation of the Chinese business upgrade path. Shanghai world dragon industrial group co., LTD., also is the best in the industry.In a world of dragon headquarters park, from world dragon CEO Mr Shen Weirong speech about the outstanding private printing enterprises growth path and experience sharing, so that the friendship of landlord, is really moving.

Gorge, share with you.On November 13, 2014, the Shanghai headquarters of dragon garden, in 2014 China printing BBS and the 14th Asia Pacific printing BBS, be there or be square with you!

Germany printing enterprise development trend

In 2013, the printing and paper-making industry downturn, sales fell 8% year on year, total orders fell by 10%.German machinery equipment manufacturing industry federation Printing and paper-making technology association director MarkusHeering lies in Frankfurt at the association annual press conference said: "we do not have conservative growth expectations The implementation."

Of the brics countries exports

German printing and paper-making industry downturn because of a fall in demand for the brics countries, for China's exports fell by 12.5%.Main overseas market share drop, influence on papermaking and paper processing manufacturers greater than the printing maker, it fell by 17.6%, 16.6% and 8.7%, respectively.For an unexpected decline in India's exports, India also dropped out of the all the top ten export market.In Brazil and Russia's business performance is not satisfactory.

Ongoing market integration and structure adjustment Due to weak demand, the average capacity utilization rate is only 75% in 2013.Market integration, can be seen everywhere because of market conditions for the production capacity and number of employees Adjust volume.Consumer industries are undergoing structural adjustment.Small-scale non-professional printing a large number of failures.Does this mean for printing and paper manufacturers:

The potential investors of the new technology gone, second-hand equipment into the market.At the same time, customer demand for printing product is changing, individualization and personalization

And the trend of the finishing a thorough technical change is pressing for the industry., so to speak, packaging and printing products and processes in a dramatic change.

A comprehensive strategic dialogue "Print2030 manufacturers

German machinery equipment manufacturing industry federation use of a few months time, in the industry to carry out the close strategic dialogue.President of the association of KaiBuntemeyer said Way: "in Print2030 theme, we organized a series of strategic seminar, clear tasks and plan the future of the global printing industry.Printing products Will be more personalized, functional, complicate and humanization.Printing products not only limited to convey information, also need to provide more additional value.At the same time, the production of printing.

Product should have low price in the near future."Buntemeyer challenge to give a general description for printing industry. Seminar in technology and improved all involved Urgent action consciousness organization level, at the same time, determine the strategic action, and planning the development route to 2030.

Resolving the problems existing in the digital printing technology

Digital printing has developed rapidly, but there are a lot of problems, including these are all we need to pay attention to.

A: digital printing machine is a simple digital process, the digital printing process from Computer printing or print directly to the Computer - to - on Paper Paper, so the requirement of digital printing machine should have puzzle, correction, binding, etc. The whole process of automation function.So the system software function is very important.

2: digital printing printing quality though due to mechanical structure, the use of material is not the same as the quality of the digital printing is not completely par and traditional printing yet, but in general, as incremental improvements were made in the imaging system, the imaging precision and to increase the output resolution, medium tolerance, every manufacturer of digital printing machine has been able to meet the needs of high-grade printing, and also to develop in the direction of higher quality.Especially multicolor more and more digital printing system, at the same time four color even six color, the color printing will also be able to meet.

3: the high cost, the cost usually consists of three elements: depreciation, materials, artificial.But the highly automated, digital system will in a certain extent, reduce the labor cost of expenditure;Depreciation of equipment and by buying the equipment investment decision;Material cost, toner type medium, for example, digital machine than it is drum powder separation, and the life of the majority of equipment drum are more than hundreds of thousands of copies, the price of the powder should be gradually reduced with the enlargement of the application;Relative to the traditional offset printing, digital printing without plate making, so will save plate making fee.It is worth mentioning that with more users, mature technology, digital printing machine's overall price level has declined.It also makes the wages of digital printing control, pushing more customer to accept the digital printing.

Four: the product can not be keep for a long time, first of all, you can do the experiment yourself, look at the digital printing press print to save time.Will use traditional, electronic ink, toner, printing ink printing quality under the sun, a few days later you will find that the digital printing machine printing printing quality is better than traditional ink printing quality color durability.

Second, many people now feel digital printing printing quality like traditional up the printed sheets of the laser printer and copier print can't long-term preservation.It's actually not the case, dry powder, for example, as the digital printer to print high resolution, digital printing machine using carbon powder are better than traditional copiers and laser printers use a finer particles, in high temperature melting process, carbon powder can dissolve like drops in the gaps in the paper.

2014 annual meeting of China packaging industry development strategy

The 2014 annual meeting of China's packaging industry development strategy in Beijing university guanghua school of management.A two-day meeting, focus on the global vision, all-round, multi-angle, deeply research and development trend of packaging industry strategy.

1. A slowdown in China is the Chinese government actively adjust, need not fear;

2. China is accelerating economic transformation process, will bring great opportunity for our country economy is;

3. The adjustment of industrial structure will deepen, mainly displays in the exit of excess industry, investment in emerging industries, the upgrading of traditional industries and develop the production of services.

To the enterprise strategic target are analyzed, and points out that enterprises need to be done on the basis of the value chain and industrial chain strategic goals.

So how do packaging industry is faced with the new normal?

The industrial structure, highly fragmented;

, the increasingly intense competition in the industry;

, the cost of rising year by year;

Growing, product homogeneity tendency;

, local severe overcapacity;

, customer price sensitivity is increasing day by day;

Industry profit margins, significantly reduced;

In the new industrial environment, continue to work with rivals' prices, costs, promotion, channels, etc., finally can only be defeated all more attrition.

Around the packaging enterprise strategy, need to adjust the new normal, entrepreneurs need to slow down, look carefully and think about the future strategy and goals.

Packaging industry as a highly decentralized industries, contains the abundant business opportunities.Therefore, the first thing to pursue the buyer of the value of the breakthrough, the second is rapidly promote the cost structure of the industry restructuring.Method is used to eliminate the industry factor, reduce below the industry standard, the elements of the elements of innovation industry did not provide, increase higher than the industry standard elements, so as to create new value, reconstructing new pattern of the industry.

Konica minolta product appearance will be there with mysterious all India exhibition

By China printing association, China academy of printing technology, Dusseldorf exhibition (Shanghai) co., LTD., jointly organized the fifth China international all India exhibition will be held in November 14-17, 2014 was held at Shanghai new international expo center.In this exhibition, konica minolta brand new flagship product for the first time uncovered the mysterious veil.

In recent years, konica minolta in the domestic production of digital printing machine market watch, the all India exhibition, the new flagship product -- bizhub PRESS C 1100/1085 will be the first uncovered the mysterious veil.It is understood that this is a revolutionary new high capacity digital color printing system, printing speed of up to 100 / min and 85 pages per minute, but its what amazing place, may have to be at the scene of the exhibition.

The exhibition highlights: (1) the new product appearance (2) make tactility printing (3) security management solution (4) capacity integrated workflow.

Children's Book Printing,Hardbound Printing,Children Album

http://www.lprinting.net/content/?621.html
We provide Children's Book Printing,Hardbound Printing and all kinds of paper printing service.
Our company locates in Bagualing, Futian, ShenZhen, and the factory is up to 6000 square meters, more than 300 employees, including around 50 various technical staffs, also has some manual workers as backup which supports us complete large printing orders in short time.
In order to control the printing quality, our equipments are all from famous printing-machine factory in the world, one set of Komori folio four-color machine, one set of mitsubishi folio four-color machine, one set of Heidelberg four-color machine, one set of komori monochrome machine. Besides, our company has full set of postpress equipment, for die-cutting, varnishing, lamination, UV, hot stamping, box and window gluing, folding, glue binding, hardcover binding, saddle stitching and so on more than 20 kinds of process, which can meet customers' personalized requirements for different products.

CTP technology in printing enterprise three areas of application

1, the technical level

CTP technology application is the most basic level, the technical level is also the most.First, we need to know the main cost of printing film depends on the price of silver, in recent years, silver rising from $10 / oz to 48 dollars an ounce.But the price of CTP plate in the opposite direction over the past two years, nearly half price.Why is the price of CTP plate and printing film in different prices?Mainly because the CTP plate of supply market competition.Next we are going to consider violet laser and infrared thermal, two kinds of technology have their own advantages.Packaging and commercial printing user to thermal CTP system is preferred;Large-format packaging printing user only thermal CTP system optional;Predominantly commercial rotary printing books and periodicals printing or the user can consider violet laser CTP system, on the use cost and printing performance, violet laser plate have more advantages;Newspapers printed user is advised to choose a violet laser CTP system, makes the purple laser CTP system in terms of speed and stability for a newspaper printing provides a solid guarantee production.Finally, we want to consider how to configure, CTP is no longer a single hardware devices, is the pronoun of a system, including direct plate maker, digital workflow, CTP plate and digital proofing, etc.The current mainstream workflow is based on the server - client "model, the underlying the database support. Software adopts the modular function, allows users to choose their own need to function, and the follow-up system development platform, or add functionality is very convenient. A typical digital workflow can contain the following functions: PDF conversion, and network technology, management, output devices support curves and puzzle, trap, CID fonts, compensation, color management, printing ink technology, digital proofing, network interfaces, CIP3 / CIP4 printing.

2, tactical level,

Application of CTP, solve the two problems, first is the quality control of CTP plate making, compared with traditional typesetting films, film printing process, the quality control of CTP plate making to make people feel relaxed and cheerful, as long as make the plate maker laser set according to the sensitivity of plate material, regular maintenance plate machine according to the requirements, success was 50%.And the other 50% is in the digital workflow of three kinds of calibration curve (linear curve, increase network plate, printing simulation curve).To precisely control the plate quality, the network density meter and print density meter is required, senior densimeter can set of printing network and print outlets and density measurement.For some plate system, also need to monitor the conductivity of the developer and pH value.The second is the CTP plate making cost control.CTP finally is green, the so-called green CTP plate is in the waste liquid discharge and water consumption in relation to traditional CTP plate materials have significantly improved.But for the printing, environmental protection is not the most important, printing eligibility of plate material, whether it is suitable for printing and the use cost is low enough is the most important, if the two problems solved, at the same time environmental protection plate is can use, fully compatible with the existing system, green CTP is "ready".The forecast is not far away, at least on the newspaper printing application, agfa violet laser from chemical processing plate completely conform to the requirements of the above, and around the world, there are also many domestic major newspaper to newspaper production switch to the environmental protection plate plate making.

Increasingly brutal competition in the industry, small profit, enterprise merger and reorganization, the moment, only the timely introduction of advanced technology, to the enterprise bigger and stronger, to survive in the market environment, today we introduce and use CTP technology is well lays the foundation for the future development of the enterprise.

Hardcover Book Printing Service,Book Printing in China

http://www.lprinting.net/content/?618.html
We provide Hardcover Book Printing Service,Book Printing in China and all kinds of paper printing service.
In order to ensure the printing quality, the production equipment of our company are imported from famous factory in the world, our company has one set of Komori folio four-color machine,  one set of mitsubishi folio four-color machine, one set of Heidelberg four-color machine, one set  of komori monochrome machine. In addition, our company has complete postpress equipment,   such as die-cutting, varnish,lamination,UV,gold or sliver stamping, sticky box, stick window, folding,binding, hardcover book,saddle stitched and so on more than 20 kind of process,we can meet the personalized requirements of customers's different products.
High-quality and efficiency, honest to success, development with innovation is our business philosophy.In order to win in the fierce market competition, we are dedicated to improving the comprehensive service ability.